ดาวน์โหลดคอร์สเรียน Electronic Circuits - Part3: Bipolar Junction Transistors ฟรี
ข้อมูลไฟล์ (File Info) :
Published 5/2023
Created by Ali Mavahebi Tabatabai
MP4 | Video: h264, 1280×720 | Audio: AAC, 44.1 KHz, 2 Ch
Genre: eLearning | Language: English | Duration: 97 Lectures ( 8h 36m ) | Size: 4.38 GB
Analysis and Design of BJT circuits (including Multisim simulations, and practical experiments)
สิ่งที่คุณจะได้เรียนรู้ (What you’ll learn) :
BJT structure, transistor currents, and minority carrier distribution.
Common Emitter (CE), Common Base (CB), and Emitter Follower (CC) configurations.
Characteristics and modeling of bipolar junction transistor (LARGE SIGNAL and small signal modeling).
Different operating regions of a BJT (cutoff, saturation, and forward active region).
BJT biasing and Stability factors.
DC and ac analysis of BJT circuits.
Design for maximum symmetrical swing and best stability.
Bias compensation techniques.
Different amplifier configurations.
Miller theorem, bootstrap technique, and Darlington pair.
BJT current sources.
Multistage amplifiers.
Analysis and design of practical BJT circuits.
Circuit analysis with Multisim (create you own BJT model with SPICE netlist)
ข้อกำหนด (Requirements) :
You should be familiar with linear circuit analysis techniques such as KVL, KCL, mesh, and nodal analysis. (These methods are reviewed in the second part of the course).
You should be familiar with basic components such as resistors, capacitors, inductors, and diodes.
You should have a basic understanding of calculus and linear algebra.
It is recommended that you have the Multisim software.
NI myDAQ (Suggested. It works well with Multisim. You may also use your own instruments).
คำอธิบาย (Description) :
In this part of the “Electronic Circuits” course, you will get familiar with one of the most widely used nonlinear components which is the Transistor. You will get familiar with the characteristics and applications of a bipolar junction transistor (BJT). The bipolar junction transistor enables you to amplify current and voltages, when used in conjunction with other electronic components like resistors and capacitors. It can also be used as a switch to turn various components of your electronic circuits on and off. After finishing this course you will understand two crucial transistor functions—amplification and switching—that are essential to the creation of electronic circuits.
For this purpose, I will start with the physical structure of the BJT. After you get familiar with transistor currents and carrier distribution inside the transistor, you will learn how to model the BJT in cutoff, saturation, and forward active regions (all these models are derived from the Ebers-Moll model). Next, you will learn how to perform DC and ac analysis. You will get familiar with stability factors and maximum output symmetrical swing, and learn how to design a BJT circuit for maximum stability, maximum output symmetrical swing, and maximum gain. In this course, you will learn different types of BJT amplifier configurations (CE, CB, and CC). I will show you some special techniques such as the Miller theorem and Bootstrap technique, and also, special BJT arrangements such as a Darlington pair. You will get familiar with multistage amplifier circuits which are followed by some practical BJT circuit experiments. Finally, I’ll demonstrate how to perform simulations in Multisim. Finally, you will learn how to create SPICE netlists, then create and simulate your own BJT models in Multisim.
คอร์สนี้เหมาะกับใคร (Who this course is for) :
This course is intended for students who are already familiar with fundamental electronic circuits (circuits that contain resistors, capacitors, inductors, diodes, and so on) and wish to expand their knowledge to semiconductor devices such as bipolar junction transistor circuits. Anyone taking this course should be familiar with basic circuit analysis theories and techniques such as Ohm’s law, Kirchhoffe’s voltage and current laws (KVL and KCL), Thevenin’s theorem, and so on. This course is also very useful for university students studying Analog Electronics / Electronic Circuits. ***IF YOU HAVE NO EXPERIENCE WITH ELECTRICAL CIRCUITS, THIS COURSE IS NOT FOR YOU.***
เนื้อหาหลักสูตร (Overview) :
Introduction
2 lectures • 2min
BJT Structure
6 lectures • 38min
BJT Circuit Configurations
7 lectures • 33min
Large Signal Modeling and DC Analysis
15 lectures • 1hr 24min
BJT Biasing, Stability Factors, ac Analysis and Swing
23 lectures • 1hr 45min
Amplifier Configurations
20 lectures • 1hr 29min
Multi-Stage Amplifiers
6 lectures • 41min
Practical Experiments
8 lectures • 55min
Circuit Analysis with Multisim
9 lectures • 1hr 9min
Conclusion (Bonus Lecture)
1 lecture • 1min
ตัวอย่างหลักสูตร (Course Preview)
File Info Official Website : https://www.udemy.com/course/electronic-circuits-part3-bipolar-junction-transistors/ License : FOR EDUCATIONAL PURPOSES ONLY ชื่อไฟล์ : Electronic Circuits - Part3 Bipolar Junction Transistors.rar ขนาดไฟล์ : 4.61 GB นามสกุลไฟล์ : *.rar Server : Google Drive วันที่อัพโหลด : 04/05/2023 แก้ไขล่าสุด : 04/05/2023 รหัสผ่าน : sbz
⚠️ โปรดระวังโฆษณาเด้งไปหน้าอื่น! เช็คชื่อไฟล์, ขนาดไฟล์ ก่อนดาวน์โหลดทุกครั้ง
💾 ดาวน์โหลด รหัสแตกไฟล์คือ sbz วิธีดาวน์โหลด | วิธีแก้ลิ้งค์เกินโควต้า
